Solo Mine Bitcoin - Bitcoin-en.com

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 

START HERE

UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode=95.85.29.144 addnode=162.243.113.110 addnode=146.185.181.114 addnode=188.165.19.28 addnode=166.78.155.36 addnode=doge.scryptpools.com addnode=doge.netcodepool.org addnode=doge.pool.webxass.de addnode=doge.cryptopool.it addnode=pool.testserverino.de addnode=doge.luckyminers.com addnode=doge.cryptovalley.com addnode=miner.coinedup.comdoge addnode=doge.cryptoculture.net addnode=dogepool.pw addnode=doge.gentoomen.org addnode=doge.cryptominer.net addnode=67.205.20.10 addnode=162.243.113.110 addnode=78.46.57.132 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!

GETTING COINS

Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.

MINING

Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.

GPU MINING

These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.

CPU MINING

CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.

Trading

Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:

Faucets

Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!

Begging

This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.

Tips

At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.

CHANGELOG

  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (cudaminer-2013-12-18.zip).
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

[SG] I Am Accepting DOGE as Payment for Custom GPU Mining Rigs for Local Pickup in Chicago, IL USA

I have two custom rigs / mining kits IN HAND and I am willing to sell. I will accept Bitcoin or Dogecoin for payment of course, or USD if you prefer I guess =)
Topaz - $850 / 1.7 BTC / 850k DOGE - 2x Sapphire R9 270 GPUs - Motherboard, CPU+fan, 3GB DDR2 RAM - 1x USB Powered PCI-E 1x to 16x Riser - 1x 40GB SATA Hard Drive - 750W PSU - Open air black metal frame - 810 kh/s Scrypt Mining on cgminer 3.7.2
Jet - $950 / 1.9 BTC / 950k DOGE - 2x Sapphire R9 270x GPU - Motherboard, CPU+fan, 8GB DDR3 RAM - 1x USB Powered PCI-E 1x to 16x Riser - 1x 40 GB SATA Hard Drive - 1000W PSU - Open air black metal frame - 880 kh/s Scrypt Mining on cgminer
Sorry but prices in BTC/DOGE are subject to change, I have to pay USD for all of the components here so I have to adjust for the exchange rate. Prices quoted here reflect the current exchange rates and will have to be recalculated if there is significant gain or loss of value on the markets.
Both rigs are mining away at the moment with cgminer 3.7.2, so if you want them they are basically plug-and-play, just need to be configured to point at your pools (which I can show you how to do if you are a newbie). Windows 7 is the 'trial version' so it will ask you for a validation code but it will run just fine without it. I am also willing to build and deliver fully working CUSTOM MINING RIGS at various hashing powers - 800, 900, 1200, 1500, and 2200 - for around $1.25 per kh/s (with payment up front).
Professionally I am a career educator, so I am very patient and willing to sit down with you if you are unfamiliar with crypto and explain how everything works. I will make sure that the miner I sell is configured right and ready-to-hash, and I will explain to you how to use it and how to keep it running right. I have mined scrypt coins on several different types of cards using both Linux and Windows OS, I have mined BTC using ASIC hardware, I have managed exchange accounts, qt-clients, and a futures account on ICBIT. So basically I have some knowledge and expertise I am willing to share with anyone who is interested and willing to invest some money with me for hardware.
I think that GPU rigs are still a very good investment in crypto for two reasons. At the moment the scrypt coin economy is pretty stable. 1,000 kh/s will get you the equivalent of 0.010 - 0.015 BTC/day depending on which scrypt coin you choose. There are several coins that give at least this good of a return, which is great on its own. But then add the fact that GPUs can be resold for a very good portion of the original value, and that a mining rig can be re-purposed as a workstation or gaming rig. Personally I think I can offer a really good value, and if my apartment were rated to deliver more electricity without overloading my circuits, I would be building and mining off of more cards myself.
I am also willing to buy/sell limited amounts of cryptocurrency in person - up to $1,000 USD. I have well established accounts on major exchanges so if you are looking to buy or sell without all that hassle, I can help you out.
submitted by arthurdent6 to dogemarket [link] [comments]

Pool 0 slow/down or URL credentials invalid

Hey redditors,
Just recently got into mining, started with bitcoins but my rig is a little too slow to keep up with all the ASICs so I have moved to mining altcoins. My most recent venture has been with middlecoin and it WAS working great, but after about 20+ hours of mining I awoke this afternoon to find that my Kh/s had been steadily dropping all night and around 20 minutes before I walked up to my computer bfgminer said middlecoin.com:3333 is not responding. Now I am trying to re-establish a connection but all I get is the error in the title. I have tried running cgminer with the same .bat and I still get the same error. I have taken down my firewall and still cannot get it to work. I am also solo mining feathercoins with my cpu, I dont know if that may cause some issues but even with feathercoin-qt not on it still wont connect to the servers.
Any help is greatly appreciated, thanks!
submitted by ehalvers to BitcoinMining [link] [comments]

Unable to mine

so i tried GUIMINER, didn't work, cgminer, didn't work either, i did cpu miner, and it seemed to be working, but at such a low value that the pool didn't recognize it then tried another miner again with no results, went back to cg miner and it did this and stays like that only showing me there are blocks available and doing nothing about it. , tried scrypting downloading different versions, still the same, now i cant mine at all, I didn't have this problem before with bitcoins, we know the future is doge, so no going back to bitcoins.
Please help... i want doge... such trubble
UPDATE: fixed script now it wont launch... please help :(
EDIT: added extra info
submitted by Jmagouz to dogemining [link] [comments]

Bitcoin, CGMiner and Teamviewer How to solo CPU mine Bitcoin & Bitcoin derived ... (Update) Headless Bitcoin Miner - CGMiner tutorial Bitcoin mining with CGMiner Mining DogeCoin with GPU use cgminer-DOGE - YouTube

CCMiner is an all in all miner for NVIDIA GPUs that supports major crypto currency mining algorithms including the most recent one's. Here we've made a complete beginners guide on ccminer from setup to configuration and troubleshooting. Bitcoin-Qt ist ein Open-Source-Projekt und derzeit einer der sichersten Vertreter unter den Mining-Clients. Hier müssen Sie sich nicht um eventuelle Angriffe auf Ihr virtuelles Geld sorgen. Ebenfalls Open-Source und vertrauenswürdig ist Electrum.Das Tool punktet mit einer 2-Faktor-Authentifizierung, dem Support von Add-ons und der Möglichkeit, Ihre Keys jederzeit in andere Bitcoin-Clients ... Configuration: Just point your miner to one of: solo. In order to perform solo mining using a CPU, the following steps can be followed: sudo apt get install build Continue reading >> Solo Mine Bitcoin - Bitcoin-en.com . The chance of successfully mining Bitcoin (ever solving a block) is very slim [1] these days. Whatever the reason is for you do decide to mine Bitcoin without joining a pool ... Download and install the ASIC Bitcoin Miner software like CGMiner, BFGMiner, and many other choices [4]. For a solo miner, the mining software connects you to the blockchain (Bitcoin Core). The main job of the Bitcoin Miner software is to deliver the mining hardware’s work to the rest of the Bitcoin network. Finally, launch Bitcoin Miner software with localhost (127.0.0.1), the rpcport (Y ... As common as it is in Bitcoin Mining, it is far to risky to be carried out over reddit. No verbal abuse. If you don't have anything nice to say, it's best not to say anything at all. Remember, we were all newbies once. Mining isn't exactly a trivial venture. No Referral Links. No Amazon/eBay referral links. No mining pool referral links. No ...

[index] [1991] [29422] [24984] [39297] [7135] [8330] [391] [15641] [25516] [4066]

Bitcoin, CGMiner and Teamviewer

This video is unavailable. Watch Queue Queue. Watch Queue Queue I use CGMiner to mine Bitcoins and Litecoins. From time to time it stops and has to be restarted. Since I have it on my office PC I lost some precious mining hours during week-ends. In this video I show you how to start mining Bitcoins with CGMiner and an account at your favorite miningpool. Get CGMiner at: https://bitcointalk.org/index.... SUBSCRIBE FOR MORE HOW MUCH - http://shorturl.at/arBHL GekkoScience NewPac USB Miner - https://bit.ly/2RIQgdX GekkoScience 8 Port USB Hub - https://bit.ly/2x... *****UPDATE***** Solo mining has been removed from client. I'll keep the video up for how it used to work, it might still work for some alt coins (unsure) yo...

#